Professional mould treatment

Our dry fog reaches every exposed surface the air touches - into folds and recesses a cloth can't. This means it treats mould on surfaces, in the air and on furniture. EverPURE, our durable antimicrobial layer, bonds to treated surfaces, helping to resist regrowth when moisture sources are managed. Most current mould remediation companies employ the use of wet foggers (ULV fogging). This administers the sterilant in a droplet size which causes it to condense on surfaces, meaning airborne mould spores and dangerous mycotoxins are left largely unaffected. Our patented dry fog technology condenses our sterilant to a far smaller molecular size. This means three things: First, it is unable to condense on surfaces and dwells in the air; treating the abundance of mould spores traditional methods can't deal with. Second, our dry fog machine creates positive air pressure, meaning the dry fog is forced to fill the entire volume of a room or house, forcing the sterilant to dwell on every surface and object. Third, it reaches every exposed surface the air touches - into folds and recesses a cloth can't, meaning we are able to treat mould contamination across the property.

Unless you've had a leak or suffered flood damage, the'res a good chance the mould in your home is a result of dampness and humidity caused by basic daily tasks like showering, cooking and drying clothes combined with poor ventilation. These human activites cause water vapour and condensation, which when combined with poor ventilation, generates sufficient moisture in the home for mould to grow.

80-85% of household mould is caused by condensation, which is man-made damp. Condensation causes mould to grow and once mould is visible in your home, it needs to be removed as it can be both harmful to health and destructive to property.Mould is caused by dampness and humidity. However, there is one type of damp which is the main culprit when it comes to household mould. 80-85% of mould problems are attributed to condensation, or in other words, man-made dampness. Only 15-20% of mould problems arise from the other two categories of damp; penetrating damp and rising damp. Condensation occurs when hot air comes into contact with cold air. There are many things we do in a daily basis which causes this. Condensation occurs when moist air comes into contact with a colder surface like a wall, window, mirror etc. The air can’t hold the moisture and droplets of water are formed. It also occurs in places the air is still, like the corners of rooms, behind furniture or inside wardrobes. This moist environment is a furtile breeding ground for mould.

Typically, if you wipe mould down, it will aggressively spore into your airspace as a defence mechanism. Wiping mould down, even with bleach, will actually make the problem worse by increasing the volume of mould spores in your airspace.

Mould is a living organism. When it is wiped down with a cloth and a household cleaner, it simply aggravates the mould colony. As a defence mechanism, it aggressively sends spores into your airspace. This has the unfortunate effect of worsening your mould problem as the mould spores will land on other surfaces and get into soft furnishings and clothes. In addition, it increases the level of harmful mycotoxins in your airspace. A common misconception is that bleach removes mould. However, bleaching mould simply depigments it, creating the impression that it's gone when, in fact, it is alive and aggressively sporulating into the airspace.

Mould is a category 1 risk to health, the same category as Asbestos, according to the Housing Health and Safety Rating System (HHSRS). It is known to cause a wide range of health problems including respiratory problems, the exasperation of autoimmune diseases, a weakened immune system and brain fog or insomnia.

The health risks associated with household mould are arguably understated and misunderstood by the general public in the UK. According to the Housing Health and Safety Rating System (HHSRS), Mould is a category 1 risk to health. This is the same category as Asbestos. The risk to health is typically contingent upon the time you’ve been exposed, the mould strains present and the density of airborne spores and mycotoxins.

The active component of our sterilant breaks down very quickly after the fogging application into acetic acid (the same acid found in 5% vinegar), molecular oxygen and water - no lasting disinfectant residue. It is a biocide, applied under a COSHH assessment by trained technicians in PPE. Occupants and pets leave during the treatment. Once treated, ventilated and cleared, your home is safe to return to - typically the same day.

Our patented technology creates a 7.5 micron sized particle. A mould spore is between 12 and 30 microns. This means the fog reaches every exposed surface the air touches - into folds and recesses a cloth can't. In special situations where there is a known issue behind a wall, we can poke a few 1/8 inch holes between the studs and treat the back of the wall directly.

We offer a 12-month warranty against the reappearance of visible mould. If it comes back within 12 months, so do we - conditional on the ventilation plan being followed and any flagged leak being repaired. With minor water issues like humidity or condensation on windows, we have seen properties stay clear over six years with the EverPURE antimicrobial layer in place. With major water issues (active leaks and ingress) you will only get about 90 days of protection.

Your technician will take three air samples upon completing the treatment; a pre-treatment sample, a post-treatment sample and an outdoor air test as a control. The air samples are then sent to an independent third-party lab. We use an accredited mould laboratory that has no affiliation with any mould testing or mould remediation companies. Once your results are in, we relay them to you in the form of an easy to understand dashboard.

Our patented dry fogger condenses our sterilant to a smaller molecular size than is possible with traditional fogging technology. This means our sterilant is unable to condense on surfaces and dwells in the air. This allows it to treat the abundance of mould spores traditional fogging methods (like ULV) can't deal with. We treat the source organism to stop ongoing mycotoxin production; we don't claim to degrade mycotoxins already deposited. We systematically treat surface, embedded (in textiles and porous materials) and airborne mould.